Helicopter > Rotor heads and accessories
2-blade and multi-blade rotor heads
Newly developed 2-blade and multi-blade rotor heads from "CAD+Modelltechnik Jung".
In addition to two differently sized 2-blade rotor heads, a 3-blade, 4-blade and 5-blade rotor head are also available.
The rotor heads were developed based on our experience with the rotor heads of the coaxial rotor helicopters, the Flettner helicopters and our large helicopter drones.
The center pieces and the blade adjustment levers have been adapted to the requirements. For these applications, the rotor heads allow a higher flapping movement of the rotor blade. For your safety, the rotor heads were subjected to extensive tensile tests at the FH Wiesbaden.
NEW: the rotor heads are now available for a rotor shaft diameter of 12 mm and also for 15 mm.
The rotor heads can be used for all similar model helicopters such as Ecureuil, Gazelle, Bo105, BK117, Sikorsky SH-60, EC135, Westland Wessex, Agusta 109, Hughes 500, Mil Mi-8, Mil Mi-24 and various Bell helicopters .
If required, the rotor heads can be supplemented with scale attachments made of rapid prototyping plastic.
2-blade rotor head for a rotor diameter up to 3,2 m (New)
Technical datas:
- New: Industrial drone design with fully encapsulated roller bearings and grease filling
- all parts in high-strength aluminum alloy in precision CNC production
- rotor diameter up to 3.2 m
- blade grip22 mm
- blade mounting screws M6
- rotor shaft diameter 15 mm
- Leaf bearing shaft 12 mm
- defined impact joint by means of an integrated joint bearing (ball bearing)
- blade grips each equipped with 2 generously dimensioned radial bearings and one axial bearing (the axial bearing is mounted between the radial bearings)
- damping by O-rings. The O-rings are available in different hardnesses. As a result, the damping can be individually adjusted to the model and the rotor blades
- the rotor heads are mounted on the rotor shaft using an M6 shoulder screw and a clamp
- running left or right version
- black anodized
- fully assembled
- other versions on request
Price 598,- Eur/pcs.
Multi-blade rotor heads, rotor diameter up to 2,5 m (currently not availblabe)
Technical specifications:
- the center pieces of the multi-blade rotor heads are designed in one piece
- all parts in high-strength aluminum alloy in precision CNC production
- version anodised in various colors or natural aluminum possible
- designed for a rotor diameter of 2.0 m to 2.5 m
- blade grip14 mm or 17 mm available
- blade mounting screw M5 (shoulder screw)
- suitable for a rotor shaft diameter of 12 mm or 15 mm
- blade grip each equipped with 2 radial and one axial bearing
- damping by means of O-rings. The O-rings are available in different hardnesses. As a result, the damping can be individually adjusted to the model and the rotor blades
- the rotor heads are mounted on the rotor shaft using a shoulder screw M5 (or M6) and a clamping ring
- assembly kit including assembly instructions
- other versions on request
2-blade rotor head, rotor diameter up to 2.7 m (currently not availblabe)
Shown below is the new 2-blade rotor head designed for rotor diameters up to 2.7 m. Here, too, all parts are made of high-strength aluminum. The blade bearing shaft has a diameter of 12 mm. The blade handles have the usual dimensions of 14 mm or 17 mm for mounting the rotor blades (other dimensions on request). The radial and axial bearings are larger on this rotor head to accommodate the higher forces of the heavier rotor blades. The center piece is available for rotor shafts with a diameter of 12 mm and alternatively for 15 mm. The damping is also done here with differently tunable O-rings. As with the multi-blade rotor heads, the assembly of the rotor head is carried out with a shoulder screw and an additional clamp.
All parts are made of high-strength aluminum or tempered steel. All aluminum parts are anodised in various colors or available in natural aluminium.